Fully Automated PCB Depaneling Machine Double Worktable Structure

Fully Automatic Depaneling Machine EXE-880

Fully Automatic Depaneling Machine EXE-880 Parameters:

2. Introduction To Equipment Configuration:

(1): Double worktable structure

1. It operates with double slide rails and cylinders and double platforms. It can cut different types of products at the same time, greatly reducing the waiting time for taking and placing plates. At the same time, the double platform can be changed to a large single platform to increase the working size and greatly reduce the waiting time. Increase equipment flexibility.

(2): Lower vacuum spindle structure

1. The automatic splitting machine is also called a gong splitting machine or a program splitting machine. It adopts a high-speed imported spindle to cut the splitter, which greatly reduces the cutting stress, with high precision, small inertia and fast response.
2. The milling cutter detection system monitors the milling cutter status in real-time and effectively prevents the cutter from continuing to run after the cutter is broken.
3. The new visual system, uniform ring light source, with brightness adjustment function, makes various types of Mark points better identify, and adapt to such as tin-plated, copper-plated, gold-plated, tin-sprayed, and various types of PCBs with different colors. The whole system is equipped with a vision Alignment compensation function.

(3): Lower vacuuming method structure

1. Funnel-type seal design, the suction port adopts a 45-degree bevel to reduce the eddy current generated by the dust inside.

(4): CNC special controller

1. The independent CNC dedicated controller integrates the control part, with strong loop control stability, high precision, fast response and transmission, and strong anti-interference.

(5): Dust collector

1. It adopts high-efficiency motor and fan blades, with high suction power, a built-in polyester needle-punched felt dust bag with high porosity, good air permeability, strong oxidation resistance, and noise can be controlled within 80 decibels.

3. Quality Assurance And After-sales Service:
1. The overall equipment warranty period is one year. If there are quality problems, after-sales maintenance and replacement are provided free of charge.
2. The after-sales service personnel are all senior professional and technical personnel of the company. After the company's formal training, they can work alone after passing the examination.
3. After the after-sales department receives the notification of equipment failure, if the equipment fails to work normally, it will reply within half an hour within the Pearl River Delta, and dispatch personnel to the scene to solve the problem within 2 hours; reply within half an hour outside the Pearl River Delta, and then According to the specific situation, dispatch after-sales personnel to the scene to solve the problem within 24 hours. (If the startup cannot be produced normally, the after-sales personnel communicate with the customer and arrive at the scene within the time required by the customer).
4. The company's after-sales personnel are on standby 24 hours a day, regardless of Saturdays, Sundays and holidays.
5. After the equipment arrives at your company, our company arranges engineering and technical personnel to install and debug it.
6. Our company can arrange after-sales technicians to stay in the customer's company for three days, responsible for training and technical guidance (the time can be extended according to the customer's appropriate requirements) until they are accepted.
7. Our company's after-sales technicians are responsible for comprehensive training. Your company's operators and technicians will serve the installation and operation of our company's equipment wholeheartedly without reservation.
8. If the customer company has the requirement, our company can help the customer company to carry out the operation and debugging test of the sub-board machine for its technical personnel.