What are the daily glitches of online distributors? Slitting machines are widely used in the electronic product manufacturing industry. Since the traditional manual-folding method will generate a lot of stress and seriously affect the quality of the product, manual-folding has basically been replaced by machine splitting.
1. After the power switch of the online distributor is turned on, the indicator light does not light up:
There are generally two situations: one is to replace the fuse; the other is that the emergency switch is not connected.
2. The itinerary of the online indexing machine is inaccurate:
There are usually two cases. One was that the trip counter was broken and needed to be replaced; another was that our travel counter was too dusty. We just need to clean up the dust.
3. The blade of the online slitter touches the left plate:
There are usually two cases. One is that the left driving light switch is damaged and can be replaced; the other reason is that there is too much dust on the left driving switch. Clean up the dust.
4. The blade of the online slitting machine touches the right plate:
There are usually two cases. One is that the right running light switch is damaged and needs to be replaced; the other reason is that there is too much dust on the right running switch. Clean dust.
5. The motor of the online slitting machine rotates, but the knife does not rotate:
The coupling top wire is loose. Open the rear case and tighten the jacking screws.
If you encounter other failures of the online splitter, we suggest that you consult a professional splitter manufacturer. We sincerely welcome new and old customers to inquire.
Contact Person: Mr. Wen
Tel: 13925736504
Fax: 86-0769-85302232