company news about The role of PCB splitter

Why use a PCB splitter in production? Today, the splitter manufacturer will share with you:

1. PCB splitter is usually used in PCB processing plants. Its purpose is to better replace the traditional manual-folding, improve production efficiency and ensure product quality.

2. When using the PCB splitter, the staff must place the PCB splitter slot on the fixed tool holder and move the PCB splitter horizontally. Do not wear loose clothing when operating the machine. Long hair must be tied up to prevent accidents.

3. The high-intensity use of the machine itself consumes a lot, and it is normal to have problems at work; for the factory, it is very important to extend the service life of the PCB splitter equipment; the maintenance of mechanical equipment is not only to improve the service life of the split machine It is also the key to ensuring the quality of its work. When the slitting machine is stopped, the staff should pay attention to the maintenance work, protect the upper and lower knife positioning plates and the upper and lower knife edges at any time, and remove the sundries on the surface and inside of the slitting machine. And always check the tightness of the machine screws. If the machine does not work for a long time, please remove the upper and lower positioning plates and their upper and lower blades, apply protective oil, and wipe them clean before use. Also, before using the machine, check the circuit for damage, etc.

4. In addition, daily maintenance should be carried out to check whether the blades are loose to avoid accidents during operation. If it is found that the shunt is abnormal and needs to be repaired, first ensure that the power plug and socket are outside the casing to prevent electric shock accidents.

The above content is about why enterprises should use an automatic splitter. If you want to know more about PCB splitters, we will be happy to serve you.