Let us introduce the maintenance process of the splitter in detail below.
1. The splitter is used to connect multiple plates after welding. An open circuit often damages a circuit or damages electronic components. This machine adopts knife cutting, which can completely reduce stress and prevent welding
Spotting and part breakage, improving productivity and quality.
2. Use the upper round knife and the lower flat knife. When the plate is placed on the lower flat knife, press the switch, and the upper round knife moves laterally to the set point, that is, cuts and divides the aluminum substrate without the wire falling off
The incision should be flat and free of burrs
3. After the work is completed, please turn off the power of the splitter and remove the waste.
4. Always pay attention to the protection of the upper and lower knives.
5. When not working for a long time, please remove the upper and lower knives and apply for oil protection. Please wipe them off before use.
6. Pay attention to checking the tightening of each screw of the indexing machine.
Contact Person: Mr. Wen
Tel: 13925736504
Fax: 86-0769-85302232