company news about Precautions for automatic splitting machine

Matters needing attention in the use of the automatic splitter

1. Instructions for operators;

1) Please read this manual and the attached machine operation manual carefully, and operate in accordance with the manual.

2) Please follow the safety regulations of this machine and make sure to comply with them.

3) Please use protective equipment and clothing as required.

4) Do not touch electrical equipment with too many hands.

5) During the operation, if you want to arrange the peripherals of the boarding equipment, please ensure safety.

6) During operation, do not put any part of your body into the device.

7) If there is any abnormality during operation, please stop immediately and handle it according to the abnormal handling method or contact our company

8) After completing the operation every day, please clean the surrounding environment of the trigger device.

9) After the daily work, when you want to leave the equipment, please replace the power supply and close the main control valve according to the correct method.

10) Do not modify the emergency stop circuit and confirm the operation.

11) It is forbidden to modify the emergency stop button, safety cover, switch for confirming stop, safety photocell, safety bolt, etc.

12) It is forbidden to pull out the corresponding safety switch or cancel the safety protection function.

13) Regular maintenance and confirm whether the abnormal stop action is normal. However, at this point, it is necessary to place a bulletin board on bulletin board that prohibits anyone else from entering to inform that the device is currently out of service or that the automatic safety device is being tested. However, the guarantee needs to be adjusted, and the licensee is not limited by this.

14) Regular maintenance and confirmation that very safe detection and protection measures are normal. However, at this point, the sign that cannot be reached by others must be replaced and placed in a conspicuous location to inform the device that the automatic safety device is currently being tested.

2. Restrictions on changing conditions;

1) The setting conditions of the boarding equipment (voltage, current, pressure, speed, etc. on the equipment nameplate, clearly displayed settings, etc.) can only be changed with the permission of the person in charge. When setting conditions are changed, the values ​​before and after the change must be adjusted and recorded.

2) The project quality indicators are determined according to the sampling inspection cycle stipulated in the "Project Management Rules". If there is any abnormal situation, you should immediately report to the person in charge of the person in charge, and follow their instructions.

3. Safety confirmation during maintenance;

1) During overhaul and repair, please follow the steps below to ensure safety.

2) Stop loading equipment on the chalkboard and conduct a search to ensure all facility facilities are parked in a safe location.

3) When entering the trigger device, please confirm the status of each safety mechanism. If necessary, arrange a special person to monitor or pull out the safety switch lock and safety pin and carry it with you.

4) All power sources must be cut off, such as the switch of the main distribution box of the power box, the switch of the motor, etc., and the parts with locking devices must be locked.

5) Use the specified parts.

6) Overcurrent protectors (such as fuses and maintenance parts) should use specified products.

7) For the correct operation of the vehicle-mounted equipment and correct safe operation behavior, please pay attention to the equipment nameplate. This nameplate is important. Please don't hurt or tear it. If the nameplate is damaged or missing, please contact the person in charge or the person in charge.