1. Instructions for the operator;
1) Please read this manual and the instruction manual of the attached machine carefully, and operate in accordance with the instructions.
2) Please abide by the safety regulations of this machine and ensure compliance.
3) Please use protective equipment and clothing as prescribed.
4) Do not touch electrical equipment with too many hands.
5) During the operation, if you want to arrange the peripheral equipment of the boarding equipment, please ensure safety.
6) Never put any part of your body into the device during operation.
7) If any abnormality occurs during the operation, please stop the machine immediately and handle it according to the abnormality handling method or contact our company
8) After completing the work every day, please clean the surrounding environment of the trigger device.
9) After the daily work is completed, when you want to leave the equipment, please replace the power supply and close the main control valve according to the correct method.
10) It is forbidden to modify the emergency stop circuit and confirm the operation.
11) It is forbidden to modify the emergency stop button, safety shield and switch for confirming closing, safety photocell, safety bolt, etc.
12) It is forbidden to pull out the corresponding safety switch or cancel the safety protection function.
13) Regular maintenance and confirm whether the abnormal stop action is normal. However, at this time, it is necessary to place a sign that no one else can enter on the sign, informing that the equipment is currently in an emergency or that automatic safety equipment is being tested. But security needs to be adjusted
And the licensee is not subject to this restriction.
14) Regular maintenance and confirmation that very safe detection and protection measures are normal. At this point, however, signs that cannot be reached by others must be replaced and placed in a conspicuous location to inform the equipment that automated safety equipment is currently being tested.
2. Restrictions on changing conditions;
1) The setting conditions of the boarding equipment (voltage, current, pressure speed, etc. on the equipment nameplate, clearly displayed settings, etc.), if you want to change, you must obtain the permission of the person in charge. Record the values before and after the change.
2) The project quality determination indicators should be implemented according to the sampling inspection cycle specified in the project management rules. If any abnormality occurs, immediately report it to the person in charge of the person in charge and follow their instructions.
3. Safety confirmation during maintenance;
1) When overhauling and repairing, please follow the steps below to ensure safety.
2) Stop onboard loading equipment and search to ensure all agency facilities are parked in a safe location.
3) When entering the trigger device, please confirm the status of each safety mechanism. If necessary, you can set up a special person to monitor or unplug the safety switch lock and safety pin, and carry it with you.
4) All power must be cut off, such as the main distribution box switch of the power box and the switch of the motor, parts with locking devices must be locked, etc.
5) Use the specified parts.
6) Use the designated product for overcurrent protectors such as fuses and repair parts.
7) In order to operate the onboard equipment correctly and correct the safe operation behavior, please pay attention to the nameplate of the equipment. This nameplate is very important, please do not injure or tear it off. If the nameplate is damaged or missing, please contact the person in charge of the person in charge.
Contact Person: Mr. Wen
Tel: 13925736504
Fax: 86-0769-85302232