What are the benefits of using an automatic PCB splitter instead of manual splitting?
Why do factories use PCB splitters?
1. PCB splitter is usually mainly used in PCBA processing plants. Its purpose is to replace the traditional manual-folding plate, improve production efficiency and ensure product quality.
2. At first glance, the PCB splitter is more complicated. There will be a dizzying feeling. However, in practical applications, no matter which circuit board is used, the application principle is not as complicated as we imagine. The practical application of online splitter in PCBA is mainly divided into three types: single-sided PCB circuit board, double-sided PCB circuit board and multi-layer PCB circuit board. Single-sided PCB boards have the simplest mechanism in terms of the number of sides.
3. Of course, in addition to considering safety issues in the design and construction process of the splitter manufacturer, in the actual operation process, employees should first carefully check the spacing between the upper and lower cutters when turning on the power. plate separator. During the use of the machine, it is strictly forbidden to put your hands inside the machine. The protective plate around the blade must not be removed under any circumstances when the machine is running to avoid accidents. Also, the PCB daughter board machine is only used as a daughter board and must not be used for other purposes. During the entire use process, electrostatic protection must be carried out, and the staff must wear an electrostatic ring for operation.
4. When using the board splitter, the worker must put the PCB board splitting groove on the fixed tool holder, and then move the PCB splitter horizontally. Do not wear loose clothing when operating the machine. Hair must be tied to avoid accidents.
5. During the period when the boarding plane stops working, the staff should pay attention to the maintenance work, pay attention to the protection of the upper and lower knife positioning plates and the upper and lower knife edges at any time, remove the sundries on the surface and inside the machine, and check the machine screws at any time. The situation is getting tighter. If the machine does not work for a long time, you should also remove the upper and lower positioning plates and the upper and lower cutters to apply oil as protection and wipe them clean before use. Also, check the circuit for damage before using the machine.
6. In addition, daily inspection and maintenance must be carried out normally to see if the blade is loose, so as to avoid accidents during operation, if the PCB daughter board machine is abnormal and needs to be repaired, first make sure that the power cord has been disconnected from the socket. , avoid the danger of electric shock during operation.
Contact Person: Mr. Wen
Tel: 13925736504
Fax: 86-0769-85302232