1. Yixie EXE-880 board splitter mainly uses a milling cutter to run at high speed and divides the PCB board in a multi-connection mode according to the pre-programmed path. The machine adopts a human-machine interface, WindowsXP operating system, simple and user-friendly interface design, automatic cutting path correction system, high-pixel CCD programming, block programming and step programming, which can replace manual breaking, C-CUT or PUSH, etc. Cutting defects, improving product quality, and reducing scrap rate. Two sets of PCB loading and unloading devices work interactively, which can effectively reduce the idle time of the machine and achieve ideal production efficiency.

2. Equipped with high-pixel CCD magnifying lens, auxiliary program teaching and editing functions, higher precision and higher precision, and clearer images.

3. Automatic MARK point positioning and correction system, real-time display of moving path and simulated route tracking, display at a glance, automatic alignment correction function, higher cutting accuracy, as long as the PCB is within 3mm

Within the internal offset range, machine vision can perform automatic trajectory correction, which greatly relaxes the operator's accuracy requirements for plate placement. Greatly improved work efficiency

4. The program's left and right workbench copy, block copy, array, multi-angle connection board copy, single-step tracking modification function, block editing and modification function, accurately simplifies the programming time and improves programming efficiency.

5. The vacuum cleaner is made of a high-power imported fan and the 10V high-voltage static elimination device has a more ideal vacuuming effect and lower noise.

6. Tool life monitoring, the milling cutter will automatically rise and fall to the position of another uncut blade after cutting a distance. The upper and lower distances and times can be set according to the length of the blade to prolong the life of the milling cutter.

7. Liming's safety door design makes the processing process clear at a glance. There are two ways to open the door: emergency stop and 50% deceleration for different customers to choose from. The emergency stop is to prevent accidents during processing and provide an operating environment for a safety inspection. When programming, it is convenient for programmers to monitor the processing process.

8. Use the two platforms to exchange and process the PCB substrate to reduce the waiting time and increase the output.

9. At the same time, all imported spindles and domestic spindles are provided to meet different customer needs.